Kathleen-en: Unterschied zwischen den Versionen

Kathleen-en (Quelltext anzeigen)

Version vom 18. Juli 2016, 16:37 Uhr

252 Bytes entfernt , 18. Juli 2016

→‎Kathleen

Tina

9

Bearbeitungen

@@ Zeile 35: / Zeile 35: @@
-{{admon/important|Please note:|You need to be connected via ethernet cable to the router, when you start installing the firmware on the router.}}
+'''Please note:'''You need to be connected via ethernet cable to the router, when you start installing the firmware on the router.
 * Download the firmware at http://berlin.freifunk.net/downloads/.
@@ Zeile 43: / Zeile 43: @@
 * If your router still has the original firmware of the manufacturer installed (e.g. if your router is new), you need to select '''Erstinstallation''' (initial installation).
-* Please consult the manufacturers manual of your router on how to update the firmware - and use these instructions to upload the Freifunk firmware to the router.
+* Please consult the manual of your router on how to update the firmware - and use these instructions to upload the Freifunk firmware to the router.
 ===Aktualisierung (Update)===
@@ Zeile 61: / Zeile 61: @@
 <br />[[Datei:1-passwortvergabe.png|600px]]
-{{admon/important|Please note:|This is the administration password for the router - it is '''not''' a WLAN password.}}
+'''Please note:'''This is the administration password for the router - it is '''not''' a WLAN password.
@@ Zeile 87: / Zeile 87: @@
 You should have received a '''.tgz'' file via Email, containing your VPN key.
+Under Windows, you can unzip the file using [[http://www.7-zip.org/ 7zip]].
+Upload the unzipped file.
-Du solltest eine Email mit einer '''.tgz''' Datei erhalten haben. Wenn du Windowsnutzer bist kannst du diese Archivdatei mit [[http://www.7-zip.org/ 7zip]] entpacken. Unter Windows fehlt die Endung "crt". Das ist die Datei ohne Endung und einem identischen Namen wie die .key Datei.
 <br />[[Datei:4-vpn.png|500px]]<br />
 ===Bandwidth===
-If you have an active node, i.e. share your uplink, choose the band width you want to share. Please keep in mind to maintain a sensible ratio between up- and download - otherwise problems may occur. Ask for help, if neccessary.
+If you have an active node, i.e. share your uplink, choose the bandwidth you want to share. Please keep in mind to maintain a sensible ratio between up- and download - otherwise problems may occur. Ask for help, if neccessary.
@@ Zeile 100: / Zeile 103: @@
 Monitoring requires a lot of resources. Therefore it should only be enabled on routers from the WDR3000 and WDR4000 series.
-{{admon/important|Please note:|Monitoring must '''never''' be enabled on the WR700 or WR800 series. Also, it is not recommended for Ubiquity devices.}}
+'''Please note:'''Monitoring must '''never''' be enabled on the WR700 or WR800 series. Also, it is not recommended for Ubiquity devices.
 <br />[[Datei:5-monitoring.png|500px]]
@@ Zeile 193: / Zeile 196: @@
 ===Wireless 5 GHz===
-{{admon/important|Please note:|This applies only to devices with a 5 GHz module, such as WDR4300 or WDR3600.}}
+'''Please note:'''This applies only to devices with a 5 GHz module, such as WDR4300 or WDR3600.
 * Navigate to ''Network --> Wifi'' and delete the Mesh-WLAN